Once all is done, click on the ‘ Apply’ button at the top right corner of the window. Then provide your preferred DNS entries separated by a comma as shown. To manually configure the DNS, click on the toggle to turn off Automatic DNS. Fill out your preferred static IP address, netmask, and default gateway. Ubuntu Network MethodĬlick on the ‘ Manual’ option and new address fields will be displayed. As you can see, the IP addressing is set to Automatic (DHCP) by default.

Now select the IPv4 tab to start setting the static IP address. In our case, the current IP address assigned is 192.168.2.104. By default, the IP address is set to use DHCP to automatically pick an IP address from the Router or any other DHCP server.

In the new window that appears, your interface’s network settings will be displayed as shown. In my case, I’m configuring my wired interface. On the window that appears, click on the ‘ Network’ tab at the left sidebar and then hit the gear icon on the network interface that you wish to configure. To get started, Launch ‘ Settings’ from the application menu as shown.

How to Set Static IP Address On Ubuntu Desktop

Set Static IP Address on Ubuntu 20.04 Server.

Set Static IP Address on Ubuntu 20.04 Desktop.

You can configure a static IP either graphically or on the command line.įor this guide, we will focus on setting a static IP address using both the GUI and on the command line, and here is the IP configuration: IP Address: 192.168.2.100ĭefault gateway route address: 192.168.2.1ĭNS nameserver addresses: 8.8.8.8, 192.168.2.1 Ubuntu uses the NetworkManager daemon for managing network configuration. In this guide, you will learn how to configure a static IP address on Ubuntu 20.04 server and desktop. For this reason, you may want to set a static IP address so that it never changes even when the lease time is up. The drawback with DHCP is that once the DHCP lease time has lapsed, the IP address of a system changes to a different one, and this leads to a disconnection in case the system was used for a particular service such as a file server. This is made possible through the DHCP server which auto-assigns IP addresses to clients from a pool of addresses. Usually, when a client system connects to a network via WiFi or an ethernet cable, it automatically picks an IP address from the router.

Ubuntu route add static